Become a Member: Get Ad-Free Access to All Our Content
2006 Prodrive P2 Concept

2006 Prodrive P2 Concept

2006 Prodrive P2 Concept

11 Jan 2006, Autosport International, UK – Prodrive has unveiled P2, its unique two-seater sports car, which has gone from concept to reality in just nine months.P2 is a fully working car featuring Prodrive’s latest technology and which has been entirely designed, engineered and built by the motorsport and automotive specialist at its operations at Banbury and Warwick in the UK.

The P2 has been developed by the motorsport and automotive technology specialist Prodrive, which runs the Subaru World Rally and Aston Martin Racing teams, to showcase its innovative technologies and engineering skills and to demonstrate its ability to design and build a unique road car in less than a year.

Prodrive’s philosophy behind the design of the car was practical performance. Weighing just 1100 kg and with a power to weight ratio of more than 350 bhp/tonne, P2 is expected to reach 100 kph from standstill in under four seconds and carry on to 280 kph. Yet, despite the focus on weight reduction, P2 has all the comforts of any modern car, with a six speaker stereo system, power assisted steering and electric windows.

P2 uses a modified Subaru Impreza STi engine and all wheel drivetrain, which incorporate two of Prodrive’s innovative technologies to enhance performance – ALS (Anti-Lag System) and ATD (Active Torque Dynamics).

The two-litre flat-four engine is fitted with Prodrive’s ALS . This has been derived from the same system currently used on the Prodrive-designed Subaru World Rally Car, but modified for use on the road. ALS can keep the turbo on boost at low engine speeds, giving the car immediate throttle response and improved performance by using more of the engine’s 575 Nm of torque throughout the rev range.

To use this power more effectively, Prodrive’s ATD system is fitted to P2’s drivetrain. It uses an active centre and active rear differential to control the torque split between the front and rear of the car and across the rear axle to optimise the car’s handling characteristics. For example, should the car begin to understeer while on power, then more torque will be pushed to the rear wheels, while if it began to oversteer then drive is sent to the front of the car, balancing it in all situations.

P2’s exterior and interior styling were created by Peter Stevens, who has worked with Prodrive on numerous road car and motorsport projects. His team produced a full scale clay model of the car to develop the styling and from this P2’s composite body panels were formed.

The P2 chassis was originally based on a Subaru R1 (a four seat mini car), which was completely reengineered to give P2 its coupe styling and to accommodate the new engine and drivetrain.

Every part of Prodrive has been involved in the development of P2 from its motorsport and automotive technology divisions. Prodrive’s chassis, engine and drivetrain and electronics departments worked with its in-house manufacturing operation to produce the specialist parts and electronic systems. The company also called on the skills of a number of its partners to provide additional complementary technical expertise and specialist components, such as wheels, brakes and lighting.

While P2 is a fully working car, Prodrive itself currently has no plans to put it into volume production. However, should a vehicle manufacturer approach the company to do so, it is expected that it would have a retail price of approximately 40,000 GBP.

Story by Prodrive edited by Supercars.net

In Detail

submitted by Richard Owen
engine Subaru Boxer-4
aspiration Turbocharged
valvetrain DOHC 4 Valves per Cyl
displacement 1994 cc / 121.7 in³
power 260.3 kw / 349 bhp
specific output 175.03 bhp per litre
bhp/weight 317.27 bhp per tonne
torque 575 nm / 424.1 ft lbs
body / frame Steel Monocoque w/Aluminum Panels
driven wheels 4WD
f brake size mm / in
r brake size mm / in
steering Rack & Pinion w/Power Assist
f suspension Doubel Wishbones w/Adj Coil Over Dampers
r suspension Doubel Wishbones w/Adj Coil Over Dampers
curb weight 1100 kg / 2425 lbs
wheelbase 2500 mm / 98.4 in
front track 1530 mm / 60.2 in
rear track 1530 mm / 60.2 in
length 3910 mm / 153.9 in
width 1855 mm / 73.0 in
height 1310 mm / 51.6 in
transmission 6-Speed Manual
gear ratios :1
top speed ~280.0 kph / 174 mph
0 – 60 mph ~4.0 seconds