Become a Member: Get Ad-Free Access to All Our Content
2011 TechArt GTStreet RS

2011 TechArt GTStreet RS

2011 TechArt GTStreet RS

TECHART presents the GTStreet RS based on the Porsche 911 GT2 RS at the IAA. It is the most powerful car which has ever left the workshop in Leonberg. The super sports car fascinates with an impressive performance of 530 kW (720 PS) and 900 Nm torque in combination with an unmistakable characteristic body kit.

High End Performance

TECHART power kits are uncompromisingly sporty as well as suitable for daily on road use. These features as well as the years of experience of the TECHART engineers were given to the development of the power kit TA 097/T2.2 for the Porsche 911 GT2 RS. The overall performance of the sports car increases to 530 kW (720 hp), the maximum torque to 900 Nm. The measured data is impressive: the GTStreet RS accelerates from zero to hundred in 3.3 seconds. After 9.5 seconds the needle passes the 200 km/h mark. With a maximum speed of up to 352 km/h the top athlete confirms his new strength in an extraordinary way.

Unique design

The TECHART GTStreet RS impresses with performance – and its look. Its capability is reflected in the extraordinary exterior design of the sports car. The significantly lowered front apron with a fixed carbon splitter and an adjustable splitter of hard-wearing polyurethane-RIM ensures additional downforce and due to additional air-ducts an improved airflow to the brakes and intercooler. Eye-catcher at the rear: the rear spoiler made entirely of carbon-fibre – handling in extreme conditions is significantly smoother as a result. A rear apron with an integrated diffuser in carbon-fibre, air outlets as well as carbon-fibre air wings close the GTStreet RS program.

Performance and suitability

Furthermore available is the TECHART Noselift System for the Porsche 911 GT2 RS. The hydraulic system features a trouble-free backfitting, a rapid height adjustment of approximately 10 mm/s with particularly silent operation as well as fully integrated operation via a button with a status indicator at the roof console. Besides the perfect integration in the GT2 RS, EMC-safe electronic control units, vehicle-specific CAN bus integrated wiring harnesses as well as high-performance test procedures are part of the premium development process.

Furthermore TECHART offers the 20-inch Formula Race lightweight forged centerlock wheel in sizes of 8,5J x 20 ET 40 and 8,5J x 20 ET 52 for the front axle and 12J x 20 ET 50 for the rear axle for the Porsche 911 GT2 RS. The rigidity and weight ratio was optimized for the TECHART Formula Race and – based on the lighter twin spokes and the connection through the centerlock – provides a weight advantages of 10% if compared to the TECHART Formula III forged wheel and impressive 25% if compared to a light alloy wheel. The result: a reduction of the rotating and unsprung mass, which results in an even more agile driving behaviour and increased driving dynamics.

Craftsmanship down to the last detail
Passion and love of detail – the exclusive TECHART character is also reflected in the interior of the sports car. TECHART’s complete leather furnishings ensure in combination with a delicately fashioned and custom-coloured decorative stitching a unique feeling. Individual decorative components made of carbon-fibre or aluminium pedals and illuminated door entry guards underline the uniquely athletic appearance of the interior. All in all, TECHART offers a virtually unlimited degree of freedom when it comes to customising the interior – with the TECHART-typical precision.

In Detail

type Professionally Tuned Car
built at Germany
engine TA 097/T2.2 Flat-6
position Rear Longitudinal
aspiration Borg Warner Variable Turbine Geometry (VTG) Twin Turbos
block material Aluminum
valvetrain DOHC, 4 Valves per Cy w/Expansion Intake
fuel feed Bosch Motronic DME 7.8 Fuel injection
displacement 3596 cc / 219.4 in³
bore 100 mm / 3.94 in
stroke 76.4 mm / 3.01 in
compression 9.0:1
power 530 kw / 710.7 bhp
specific output 197.64 bhp per litre
bhp/weight 518.76 bhp per tonne
redline 6800
body / frame Unitary Steel Monocoque
driven wheels RWD w/PSM, LSD
wheel type Formula Race Forged Centerlock
front brakes PCCB Ceramic Discs w/Brembro 6-Piston Calipers, ABS
rear brakes PCCB Ceramic Discs w/Brembro 4-Piston Calipers, ABS
front wheels F 50.8 x 21.6 cm / 20 x 8.5 in
rear wheels R 50.8 x 30.5 cm / 20 x 12 in
steering Rack & Pinion w/Variable Power Assist
f suspension MacPherson Struts w/Adj Lower Control Arms, Coil Springs, Electric Adj Tube Shocks, Adj Anti-Roll Bar
r suspension Multi-Link w/coil Springs, Electric Adj Tube Shocks, Adj Anti-Roll Bar
curb weight 1370 kg / 3021 lbs
weight distro 39 % / 61 %
wheelbase 2350 mm / 92.5 in
front track 1514 mm / 59.6 in
rear track 1549 mm / 61 in
length 4468 mm / 175.9 in
width 1852 mm / 72.9 in
height 1481 mm / 58.3 in
transmission 6-Speed Manual
gear ratios 3.15:1, 1.89:1, 1.40:1, 1.09:1, 0.89:1, 0.73:1
final drive 3.44:1
top speed ~352 kph / 218.59 mph
0 – 100 kph ~3.3 seconds
0 – 200 kph ~9.5 seconds