The immediate shortage of supplies after the war meant that the new sports car had to use many recycled components. Naturally, many of these were sourced from Germany\u2019s most important prewar race car, the BMW 328. Furthermore, Ernst Loof was an ex-BMW engineer and the very one that put together von Hanstein\u2019s winning 1940 Mille Miglia Coupe. Loof knew the 328\u2019s 6-cylinder engine was the most suitable power train available. The British understood this even more copied the design for a Bristol engine which powered numerous English sports cars.<\/p>\n
In many ways the Veritas was a re-built BMW 328 with a new aerodynamic body. Some cars used the original 328 chassis with a complex network of tubes to support the larger aluminum body. The very first cars actually raced as BMW-Veritas. Later, objection from BMW meant that the model would be simply known as the Veritas Rennsport.<\/p>\n
Around the BMW power train, the Veritas used a steel chassis and slab-sided aluminum body. Many cars were built from customer-supplied parts. Veritas could offer engine tuning upwards of 125 bhp. This package set a 2-liter speed-record of 147 mph on the Belgian Autoroute at Jabbeke. Direct competition came from the emerging Ferrari 166, Frazer Nash Le Mans and Osca MT4.<\/p>\n
Following the return to stability and economic growth, Veritas enjoyed success during the rebirth motor sports. One of their first customers was Karl Kling who won at Hockenheim in 1947. He later scored a major victory at the 1949
\nADAC Eifelrennen race on the N\u00fcrburgring. He averaged almost 100 mph around the circuit. These victories put Veritas on the map, but the supply of pre-war 328 components were drying up.<\/p>\n
With a huge amount of orders on the table, Loof was forced to make an engine on his own. He employed the services of Heinkel Flugzeugwerke who took a break from their aircraft business to produce an engine similar to the 328\u2019s. The new unit was cast entirely in aluminum rather than the original\u2019s cast iron. Furthermore, it had seven main bearings, a square bore & stroke, hemi combustion chambers and three downdraught carburetors. Being built by hand, only 50 of these units were built before production haulted.<\/p>\n
In 1951, a Veritas was converted into a single-seat Formula 1 racer known as the Meteor. Run under the F2 regulations, many cars contested the 1951 and 1952 German Grand Prix with mediocre results.<\/p>\n
In 1949, Veritas relocated to Muggensturm and to the N\u00fcrburgring in 1950. Unfortunately, the performance capabilities of the car were suffering compared to the competition. The company tried to branch out and make road-cars known as the Komet, Saturn and Scorpion as well as produce a new engine by Heinkel Flugzeugwerke. With a short supply of money, even the reported 200 orders couldn\u2019t save the company. By 1953, the small firm closed and Ernst Loof went back to BMW.<\/p>\n
Production of the Rennsport was limited to about 20-25 cars of which 15 survive. Many had detail differences to suit the needs of each individual customer and the available supply of components.<\/p>\n
Veritas Rennsport Images<\/a><\/h4>\n![\"1948\u21921952](\"http:\/\/www.supercars.net\/blog\/wp-content\/uploads\/2015\/12\/1948_Veritas_Rennsport3.jpg\" "\\"1948\u21921952")
<\/a> ![\"1948\u21921952](\"http:\/\/www.supercars.net\/blog\/wp-content\/uploads\/2015\/12\/1948_Veritas_Rennsport2.jpg\" "\\"1948\u21921952")
<\/a> ![\"1948\u21921952](\"http:\/\/www.supercars.net\/blog\/wp-content\/uploads\/2015\/12\/1948_Veritas_Rennsport1.jpg\" "\\"1948\u21921952")
<\/a><\/p>\nSee More Veritas Rennsport Images<\/a><\/h4>\n
<\/a> <\/a> <\/a><\/p>\n