![\"\"](\"https:\/\/www.supercars.net\/blog\/wp-content\/uploads\/2014\/11\/Outsourced-Cropped-2-770x384-1.jpg\")
<\/a>John Gordon started what eventually became the Gordon-Keeble. Born in 1918 in England, he got the car bug early; at age 18, he was building and modifying racecars. Then World War II interrupted, and he served in Africa and Italy. After the war, he lived and raced in Italy and France. In 1949, he met and competed with Nuccio Bertone at the Mille Miglia, a meeting that would prove very helpful later.<\/p>\nUpon his return to England in the early \u201950s, he began a business turning old Rolls-Royces into shooting brakes. He bought a garage and called it Peerless Motors Ltd, and began building the Peerless GT\u2014a fiberglass GT with a TR2 driveline. While in the U.S. testing the market for the Peerless, he realized there was a market for a high-performance version of the car with a V8 engine. He looked at Chrysler and Ford engines\u2014the former being too heavy and the latter having too little power. The Corvette engine, though, had the power of an Aston Martin and considerably more reliability, so he bought two engines and shipped them to England. When he arrived home, he was contacted by Jim Keeble, an engineer, tuner, racecar builder and racer. An American serviceman had asked Keeble if a V8 could be installed in a race-prepared Peerless GT. Gordon agreed to use one of his new Corvette engines for the project, and together Gordon and Keeble built the car.<\/p>\n
Early in the development of the car, parts were difficult to find. Many suppliers were reluctant to provide parts for a car that would carry four people and their luggage, have 300 bhp, and do 140 mph. This resulted in a compromise in the design of the chassis\u2014the parts that they could get rather than the parts they wanted dictated a design that they would have done differently. Steering, for example, was a particular problem. Rack and pinion was preferred, but no suitable unit was available. This caused them to use a Cam Gears steering box with a 18:1 ratio, probably the most dated feature of the car.<\/p>\n In his search for a coachbuilder, Gordon attended the Turin Auto Show, where he ran into Nuccio Bertone. They spent time together looking at the displays of cars and discovered that they liked the same designs. Bertone agreed to take on designing and building the body once the chassis design had been completed. Gordon\u2019s only constraints were that there be enough headroom for four people and that the car have quad headlights.<\/p>\n Meanwhile, Keeble was hard at work on the chassis. The final design was for a spaceframe chassis using a Peerless subframe and square tubing. The car had independent front suspension with coil springs and unequal length wishbones, and at the rear, a De Dion rear axle, with a Watts Link, parallel trailing arms and coil springs. Shocks were Armstrong Selectaride shocks controlled by a knob on the dash. Brakes all around were Girling discs with two master cylinders. The engine for the Gordon GT prototype was the second of the Corvette engines Gordon had brought back from the U.S.\u2014283 cid, 290 bhp at 6250 rpm with three Rochester two-barrel carburetors. The transmission was a Borg-Warner all-synchro four-speed. The badge for the Gordon GT had the Gordon Highland tartan with a stag\u2019s head.<\/p>\n After Geneva, the car returned to England, and Keeble made it driveable. Press testing of the prototype in October 1960 resulted in rave reviews. Autocar said \u201c\u2026its overall character and performance might border on sensational.\u201d They called it \u201c\u2026the most electrifying car it (the magazine) has ever tested.\u201d But Gordon believed that the U.S. was the primary market for the GT, so he put the car on the Queen Mary and headed to the States in 1961. Gordon had met Zora Arkus Duntov in the \u201950s and was able to get Duntov to drive the car. The Gordon GT lapped the Corvette test track faster than the Corvettes, so Duntov was impressed. He introduced Gordon to Ed Cole, who drove the car and agreed to provide engines and transmissions for the car, for \u00a3400 each.\u00a0 Cole wanted the first car produced, but he also asked for 1500 of the cars to put in GM showrooms in order to attract people to the showroom where, hopefully, they would buy GM cars.<\/p>\n Even with all the good press and the promises of drivelines, financing still eluded Gordon. George Wansborough had been brought on as a member of the board of directors, and he took on the search for funding.\u00a0 He eventually decided to use family money to fund production, although it proved not to be enough for a large initial production run. It also made him a very powerful member of the board. Bertone suggested looking for funding in Italy, and brought Gordon and Renzo Rivolta of Iso together.\u00a0 Rivolta tested the car and even studied the second chassis. Unfortunately, no agreement resulted, and Rivolta returned the chassis\u2014interestingly, with many engineering marks and measurements on it. Eventually, after producing nothing more significant than the Isetta, Rivolta decided to produce a GT car\u2014the Iso Rivolta\u2014which looked amazingly like the Gordon GT and even had a Corvette driveline!<\/p>\n After a divisive board meeting, Gordon left the company in October 1963, leaving the Wansborough family in control. Keeble had returned to his own business, thinking his part was done, but Wansborough asked him if he would return to set up production of the car, now to be named Gordon-Keeble GK-1. Keeble accepted and, after an old factory building was found, established the production line in mid-1963. Gordon-Keeble Ltd. produced its first car in March 1964. It used a 327 cid Corvette V8 engine producing 300 bhp at 5000 rpm. It was fitted with one Carter AFB carburetor instead of the three Rochesters. Production had finally begun, and David Brown of Aston Martin even sent a \u201cbabygram\u201d saying: \u201cCongratulations. It\u2019s a motorcar.\u201d<\/p>\n The GK-1 had a fiberglass body, because fiberglass was more suitable for limited production runs. A mould was taken from an aluminum copy of the prototype\u2019s body so the fiberglass bodies could be formed, but there were problems. If allowed to sit before being mounted on a chassis, the fiberglass continued to cure, causing the body to widen\u2014the body would grow! The solution was to produce a dummy chassis on which each new body was mounted as soon as it came from the mould. The body would remain there until it was time to put it on a production chassis. It was a fix, but it, and other fixes, were costly to a company with limited resources.<\/p>\n Parts supply was a continuous problem for Gordon-Keeble Ltd. To contain costs, many parts were sourced from much larger manufacturers, and vinyl was used instead of leather for the interior. A surprising number of the cars remain. There were 97 owners listed in the Gordon-Keeble Owners Club roster published in July 2013. Only one car is shown as \u201clocation unknown,\u201d and two are shown as destroyed. Most of the cars are in the UK and Europe, although six are in the U.S. and Canada, seven are in Asia and Australia, and one is owned by the Royal Family of Kuwait.<\/p>\n A GK-1 in Vicksburg, Mississippi<\/strong> Cashman has also made his mark in the Gordon-Keeble Owners Club. The window control buttons seemed impossible to find, and many owners had replaced the original white ones with whatever they could find\u2014often black buttons. Cashman found a supply of the original, white doorbell buttons in a hardware store in Vicksburg, and provided them to the club.<\/p>\n Cashman, who says he is \u201cdown to sixteen\u201d cars in his collection from more than twenty, appreciates the Gordon-Keeble. His collection, which he prefers to call an \u201caccumulation,\u201d includes a wide variety of cars, from a Citroen 2CV and Lotus Europa to an Armstrong Siddeley Station Coupe (pickup truck), Austin Princess Limousine, and \u201964 Cadillac Coupe d\u2019Ville. He calls himself\u00a0 a \u201ccaretaker\u201d of the cars, but his favorites are the Gordon-Keeble and a Triumph TR6\u2014his first car.<\/p>\n<\/a>A disagreement with the board of directors of Peerless resulted in Gordon leaving the firm. Now on his own, Gordon approached Keeble about designing and building a new car, to be called the Gordon GT. Keeble was an excellent choice, as he had experience in adapting manufacturer\u2019s parts for special purposes, as well as building parts from scratch. Together they sought out the key parts needed for a four-seater with a top speed of 140 mph\u2014Gordon\u2019s only requirements. The result was a car designed with limited resources that used a mix of off-the-shelf and unique-made parts. Unfortunately, problems with the supply of sourced parts would be the eventual undoing of the company.<\/p>\n<\/a><\/a>Once the plans were done for the chassis, they were sent to Bertone, where Giorgetto Giugiaro did the actual design. Chassis construction was completed and shipped to Bertone only four weeks before the Geneva Auto Show. The car was finished in time, and appeared on the Bertone stand at the show on March 10, 1960. It was the only completely new car at the show, and it was a hit, generating enough financing to continue the project and resulting in the founding of the Gordon Automobile Company.<\/p>\n<\/a>There is an off story about the decision to change the badge from the one on the Gordon GT to the GK-1. Photos were being taken to show the car\u2019s luggage capacity\u2014suitcases were repeatedly loaded and removed from the trunk. The photo shoot was only a few days after the Great Train Robbery, and a lady observing the activity called the police to report what she thought might be stolen property. While the police investigated, a tortoise wandered in front of the car. Someone picked it up and put it on the hood of the car, where it urinated, stripping the paint. Apparently, the story was good enough to result in the tortoise being made the mascot of the GK-1!<\/p>\n<\/a>Some parts were even sourced from non-automotive manufacturers. The buttons for the electric windows, for example, were doorbell buttons. The problems with sourcing resulted in few cars being exactly alike\u2014bumpers, horn buttons, seats and rear lights came from several different sources. And problems with the supply of parts caused production delays that eventually led to the company\u2019s demise. It was a long strike at the company providing the steering boxes that caused Gordon-Keeble Ltd. to close. Without parts, no cars were being finished, which meant no money was coming in. In February 1965 half of the workforce was laid off. The rest were laid off in <\/a>March. There was an attempt to resuscitate the company as Keeble Cars Ltd., but only seven cars were produced before the company failed and Keeble left for good. A final attempt was made in late 1966, but it resulted in only one car. Gordon-Keeble Ltd built 91 GK-1s and Keeble Cars Ltd. built eight, resulting in 99 true Gordon-Keebles. One car was built from parts in 1969 and became the only one with leather trim. It is a shame that Gordon didn\u2019t listen to Keeble early in their relationship.\u00a0 Keeble did not want to depend on outside suppliers; he believed they could build the important components they needed. Gordon disagreed, and many parts came from outside the company.<\/p>\n
\nPat Cashman had seen an article about a Gordon-Keeble sometime in the 1980s, and he wanted one. His wife, Barbara, related the story about when he found his in the early 1990s: \u201cI was in bed reading my Sunday lessons, and he was reading his bible (Hemmings Motor News).\u00a0 He said, \u2018It\u2019s a sign from God! There\u2019s a Gordon-Keeble for sale in Maryland.\u2019\u201d The owner was a retired Marine pilot working in the Washington, D.C., area. Pat had his nephew check it over, learned that it only needed tires and brakes, and bought it. The car was built in 1964 and is the 23rd of the 99 Gk-1s built. Since he has had the car, he has improved it somewhat, although without making dramatic changes. He retrimmed the front seats and door panels, so they are not original. He also added a Milodon seven-quart oil pan with a remote oil filter and oil cooler; and he replaced the radiator with an aluminum Be Cool radiator and high-volume water pump. These improvements made the car much more tolerant of the temperatures in the Deep South.\u201d<\/p>\n<\/a>Pat and Barbara Cashman have had some very enjoyable adventures with the Gordon-Keeble. In 1997, Pat saw a piece in AutoWeek announcing that Gordon-Keebles were being sought for Concorso Italiano in conjunction with the August events in the Monterey area. Giugiaro was being featured that year, so Cashman trailered his car to California. Giugiaro picked ten of the cars he had designed for the display at the entrance to the show, and the Gordon-Keeble was in spot number one. Cashman got Giugiaro to sign his car\u2019s fuse box cover and has their picture taken together as mementos of the experience. Then there was the Copper State 1000. At the start of the first stage, a lens fell out of Barbara\u2019s glasses, so they just tucked in behind the car in front of them and carried on. On the last day, a brake line failed, leaving them to finish in Phoenix on the \u201chook.\u201d More enjoyable than the trials on the road were the dinners, where they sat with Dennis Simanaitis and shared stories.<\/p>\n