2011 Baldwin-Motion Camaro Phase III 427-SC
Above Images ©Redline Motorsports
Phase III 427-SC is the first series production car from Baldwin-Motion and their partners at Redline Motorsports. The first Camaro supercar was built for Joel Rosen of Motion in June of 2011 and our feature car debuted at the 2011 SEMA Show as car #2.
The 427-SC is a completely revised from the wheels to the engine. This includes new brakes and suspension as well as the agressive body kit.
Redline Motorsports uses a modified version of the LS7 with a Kenne Bell supercharger to produce 800 bhp up to a possible 1000 bhp. The bespoke block uses new aluminum pistons and steel connecting rods.
The bodykit was based off a car made by Redline Motorsports for the 2010 SEMA Show called the HTR-850R. From this Motion specified specific graphics and paint schemes for the design.
The first 2011 MOTION Camaro, a limited-production 800-horsepower Phase III 427-SC Supercharged Supercar, was the centerpiece of the Toyo Tires exhibit at the Super Chevy Show at Palm Beach International Raceway, April 8-10. Ordered by Joel Rosen, it represents the ultimate performance model of Baldwin-Motion's 2011 FANTASTIC FIVE! Only a limited number of $150,000 427-SC Camaros will be produced, whereas production of SS and Phase III 427 & 454 MOTION Camaros, starting at under $80,000, will be market-driven.
*Supercharged GM LS7 427 Aluminum Engine
*2.8-Liter Twin-Screw Supercharger System
*Eight-Rib supercharger drive assembly
*Unique block, 4.125-inch bore, pressed-in liners
*Forged 2618 Aluminum 9.3-to-1 pistons
*Forged 6.125-inch H-Beam Steel connecting rods
*Forged 4.00-inch stroke steel crankshaft
*Race-prepped CNC-ported Aluminum heads
*Custom Redline R3-SC Blower camshaft
*American Racing High-Efficiency tubular exhaust system
*MBRP Stainless Steel mufflers, dual outlets
*High-Capacity air intake system
*160-degree high-flow thermostat
*Custom calibrated Engine Management System
*High-Capacity fuel system
*Upgraded TR6060 Six-Speed manual transmission (ONLY)
*ZR1 Corvette dual disc clutch system
*MGW short throw shifter
*1,000 Horsepower axles
*Pfadt Billet rear cradle mounts
*Pfadt differential bushings
*Pfadt trailing arms & tie rods
*Pfadt Coil-Over F&R Suspension
*Pfadt F&R sway bars
*Brembo Six-Piston Monoblock front brakes with 380-mm two-piece rotors
*Brembo Four-Piston Monoblock rear brakes with 380-mm two-piece rotors
*Custom MOTION painted striping
*Custom MOTION wheels with painted accents
*Custom Phase III-SC Hood with glass window
*Aggressive front fascia with air intake inlets
*Phase III-SC Rear Spoiler
*MOTION badges & VIN plates
*Accented front and rear seats with embroidered headrests with Carbon Fiber finish
Story by Supercars.net