n e 1 know what the boost pressure is set at on the turbos?

Discussion in '2000 Hennessey Viper Venom 800TT' started by iljlz4l, Aug 9, 2002.

  1. ive heard 6 psi ??? <!-- Signature -->
     
  2. Re: n e 1 know what the boost pressure is set at on the turbos?

    It was at 8psi for the 833 horses when tested by MT. Last I heard, it was at 12 psi, accompanied with a gentle shot of nitrous.
     
  3. Re: n e 1 know what the boost pressure is set at on the turbos?

    is it true that MT tested it on half its max boost pressure?
     
  4. Re: n e 1 know what the boost pressure is set at on the turbos?

    Hennessey says 12 is close to the limit, with the stock block. 14 is his next target, but after that, he'll have to put in heavier duty bottom end pieces (crank, rods, bearings, pistons, etc.)
     

Share This Page