2010 Hennessey Camaro HPE650
Defined by its engine upgrade, the HPE650 Camaro is a supercharged engine from Hennessey. Not only limited to power, Hennessey has also made a list of other upgrades which can comprehensively change almost every aspect of the Camaro.
The engine uses a Hennessey/Magnuson supercharger which raises horsepower to 655 HP @ 6,300 rpm . To accommodate the new system, Hennessey also fit a new air induction system, high-flow injectors and recalibrated engine management. A nice option is the stainless steel exhaust system with long-tube headers and high-flow catalytic converters.
With the ‘Complete’ package, Hennessey fits a rear lip spoiler, front splitter and side rocker panels. An exterior graphics package calls out ‘Hennessey S/C’ on the rear quarter panel and includes stripes on the hood. Further options include HPE wheels, Peddler’s coil-over suspension and Brembro Brakes.
HPE650 Supercharged Upgrade Includes
*TVS2300 Supercharger System (Black or Chrome)
*High-Flow Cylinder Heads (Core Exchange)
*HPE650 Custom Spec Camshaft
*HPE Cold Air Induction
*1-7/8 inch Long Tube Stainless Steel Headers
*High Flow Catalytic Converters
*Upgraded Fuel Injectors
*HPE Engine Management Calibration
*Professional Installation
*Dyno Tuning & Road Testing
*Hennessey & HPE650 Exterior Badges
*Limited Edition Dash Plaque & Engine Plaque w/ Serial Number
*Hennessey Embroidered Headrests
*”Powered by Hennessey” Modified Engine Cover
*Hennessey Premium Floormats
*1 Year / 12,000 Mile Limited Warranty
Additional Appearance and Performance Options
for the HPE650 also Available:
*Stainless Steel Cat-Back Exhaust
*Exterior Graphics Package
*Lightweight Wheels
*Torque Converter or Clutch Upgrade
*Full Coliover Suspension Kit
*Hennessey CarbonAeroโข Body Kit
*Custom Leather Interior
Story by Supercars.net
In Detail
| submitted by | admin |
| type | Professionally Tuned Car |
| built at | Sealy, Texas, USA |
| engine | Chevrolet LS3 V8 |
| position | Front, Longitudinal |
| aspiration | Magnuson TVS2300 Supercharger |
| block material | Cast Aluminum |
| valvetrain | OHV, 2 Valves per Cyl |
| fuel feed | Electronic Multi-Point Fuel Injection |
| displacement | 6162 cc / 376.03 inยณ |
| bore | 103.25 mm / 4.1 in |
| stroke | 92 mm / 3.6 in |
| compression | 10.7:1 |
| power | 488.4 kw / 655 bhp @ 6300 rpm |
| specific output | 106.3 bhp per litre |
| torque | 870.4 nm / 642 ft lbs @ 4400 rpm |
| body / frame | Unitary Steel Monocoque |
| driven wheels | RWD |
| front brakes | Ventilated Discs w/4-Piston Brembo Calipers, ABS |
| rear brakes | Ventilated Discs w/4-Piston Brembo Calipers, ABS |
| f suspension | MacPherson Struts w/Anti-Roll Bar, Coil Springs |
| r suspension | Multi-Link w/Anti-Roll Bar, Coil Springs |
| transmission | TR6060 6-speed Manual |




